Disassembly Manual

How to：
1. cross-stitch the ones and
twos in the picture;
2. Connect the MICROUSB
cable to the MICROUSB port
on the wireless charger and
connect the other end of the
cable to the USB port or the
USBAC adapter (which uses
the QC3.0 or PD protocol
adapter), with a red light
indicating that the charger is
properly connected and ready
to use;
3. Place the device on a
wireless charger and make sure
it is in a central position;
4. When it is properly charged,
the charger indicator lights up
blue;
Points to note:
1. Keep the charger away from
water or other liquids.