Specifications

03/04
ComBi
line
62
5. OPERATING PANEL
5.1 Overview control panel buttons
The control panel contains a number of SOFT buttons and a graphic display. After the operator menu has been
activated via a PIN, the selection, start and stop buttons have an extra function besides their basic functions.
CAUTION
• Never press de buttons with a sharp object.
• Protect the controls against dirt and grease.
Selection buttons (4x)
The selection buttons are used
to select the standard brewing
amount. The chosen amount is
confirmed using the display and
can be increased or decreased
using the same selection
buttons, as required.
Display
The display informs the user
about the status of the most
important functions of the
appliance. The following
paragraph informs you about the
different pictograms, text and
their meanings.
STOP button
Use the STOP button to cancel a
selection or to (emergency) stop
a process. An emergency stop
results in the process being lost,
so it must be executed again.
This button can also be used as
a cancellation button if the
operator menu is activated.
START button
Use the START button to start a
brewing process. First choose
the brewing amount with one of
the selection buttons. This button
can also be used as a
confirmation button if the
operator menu is activated.
On/Off-switch
This switch is used to turn the
coffee making and hot water
systems ON (I) or OFF (0).
Container heating buttons (2x)
Use the container heating button
to switch the power sockets that
are on the side of the column
ON/OFF. ATTENTION: Only use
the power sockets for the
container heating, do not connect
any other electrical appliances.
(Maximum capacity 100W).
Boiler button
Use the hot water button to
switch on the hot water system.
After being switched on, a tap
symbol appears at the top of the
display. The hot water system
can be switched off again using
the same button.
Timer button
Use the timer button to program
the brewing process and/or the
hot water system for use at a
later point of time. §6.1.2.