Specifications

03/04
ComBi
line
76
11. THE OPERATOR MENU
This chapter describes how the different settings can be
changed by trained, qualified personnel. To gain access to the
operator menu, read below. Once in the operator menu the
control panel has the following functions:
Button selection arrow up
Button selection arrow down
Button back (without saving changes)
Button accept (activate)
11.1 Menu functions
You have the possibility of changing settings and have access
to a number of maintenance functions via the operator menu.
It is possible to select the following functions:
Menu Explanation of Operator menu
0 Counters see 12.1
1 Descaling see 12.2
2 System settings see 12.3
3 Coffee settings see 12.4
4 Hot water settings see 12.5
5 Load defaults see 12.6
How do you get access to the operator menu?
1. Switch the appliance off (0)
2. Hold the START button (fig. 1-6.8) and switch on (I) the
ON / OFF switch (fig. 1-2).
3. Release the START button when the display lights up. In
the display appears: Operator menu. Press any button.
4. Press any button. In the display appears:
Enter PIN: _ _ _ _ _
5. Look up the associated 5 digit PIN and enter it using the
numbered buttons in the display (fig. 1- 6.4 to 1-6.6).
Please note: the code number is produced at random,
so the PIN is always different!
6. After entering the PIN the Operator menu will light up in
the display.
Operator menu Fig. 15
PIN table operator menu
Code no. PIN
1 42122
2 33443
3 14113
4 24212
5 33313
6 14441
7 41231
8 34314
9 42134
10 33314
11 42322
12 43222
13 32244
14 33124
15 34312
16 34424
17 14224
18 13244
19 33441
20 14134