Specifications

ComBi
line
03/04
81
12.2.3 Hot water counter (menu 1.2)
After activating the hot water counter 1.2 you can read how
many litres away from a hot water signal the coffee maker is.
12.2.4 Start descaling program for hot water
system (Menu 1.3)
This is where you start the descaling program for the hot
water system.
Preparation
- Read the warnings and user guide on the sachets of the
Animo scale remover first.
- Dissolve 2 x 50g sachets of Animo scale remover in
1 litre of warm water (60°C). Stir the solution thoroughly
so that the powder is completely dissolved.
- Follow the instructions shown on the display and confirm
each action with .
Display: 1/5 Empt boiler. Press Start.
Empty the boiler with the hot water drainage tap (fig. 1-3).
Drain the remaining water off with the drainage hose
(fig. 1-14 ), the boiler is now completely empty.
Once the boiler is empty press the START button .
(if a double beeping signal sounds the boiler is not completely
empty).
Display: 2/5 Funnel right -> Add solution. Press Start.
Remove the cap from the opening on the right, next to the
swivel arm (fig. 1-11). Place the supplied funnel in the opening
and pour the descaling solution slowly in the funnel.
Once all the descaling solution has been poured, press the
START button .
Display: 2/5 Filling / heating up. Please wait.
The boiler fills and heats up, the descaling solution is
distributed. When the boiler has reached a certain
temperature a beeping signal sounds.
WARNING
• The hot water system must be drained completely empty
a number of times during the descaling procedure.
Use the drainage hose from under the foot plate for this
(fig. 1-14). If necessary turn the furthest away closing tap
open carefully and let water run in to one bucket.
Careful; the water is hot!
Start descaling program Fig. 20
hot water system