Specifications

ComBi
line
03/04
91
12.5 Hot water settings (Menu 4)
PIN Hot water settings then select function
An overview of all hot water settings follows in the display. At
the top of the display is a navigation bar on which the selected
menu function number is shown.
Menu Explanation of hot water settings items
4.0 Temperature unit see 12.5.1
4.1 Show temperatures see 12.5.2
4.2 Temperature boiler see 12.5.3
4.3 Descale indicator see 12.5.4
12.5.1 Temperature unit (menu 4.0)
You can change the unit of the temperature from degrees
Celsius (°C) to degrees Fahrenheit (°F) with this function.
Select the required choice and confirm your changes with the
START button or go back without saving any changes by
pressing the STOP button .
12.5.2 Show temperature (menu 4.1)
You can replace the tap symbol with the actual hot water
temperature with this function. The display is set to show the
tap symbol as standard.
Select the required choice and confirm your changes with the
START button or go back without saving any changes by
pressing the STOP button .
System settings menu Fig. 36
Set temperature unit Fig. 37
Show temperature Fig. 38