User's Manual

P1 Lite
Owner’s Manual
D2321
1 Important Safety Instructions
Read and understand all instructions before you use this device. Do not make any changes or
settings that are not described in this manual. If physical injury, loss of data or damage is
caused by failure to follow instructions, the warranty does not apply.
Setup
To reduce the risk of fire and/or electric shock, do not expose the device to rain or
moisture, and objects filled with liquids, such as vases, should not be placed on the
device.
Do not place this device on soft surfaces such as tablecloths or carpets. Otherwise the
device could catch fire.
Do not place this device in areas susceptible to excessive dust and dirt or near any
appliance generating a strong magnetic field.
To prevent overheating, do not block or clog the ventilation openings.
Never place this device in a confined space. Always leave enough space around the
device for ventilation.
Protect the device against direct sunlight, heat, large temperature fluctuations and
moisture.
When the device is running for a long period of time, the surface becomes hot. Shut it
down immediately and unplug the power cord.  Only after the device has cooled down,
you can continue to operate.
Always handle the device with care. Avoid touching the lens.
Never place heavy or sharp objects on the device or the power cord.
To avoid electric shock, do not disassemble.
Use attachments or accessories specified by the manufacturer only.
Avoid extreme vibrations. It may damage the internal components.
Do not allow children to handle the device without supervision.
Under the following conditions, a layer of moisture can appear inside the device which
can lead to malfunctions: a) if the device is moved from a cold to a warm area; b) after a
cold room is heated; c) when the device is placed in a damp room. To avoid any
moisture, seal the device in a plastic bag before moving it to another room, and wait
for one to two hours before you take it out of the bag.

Summary of content (15 pages)