User's Manual

4
Pairing Instructions
1.
2.
3.
4.
5.
6.
7
.
After pairing for the first time, your device will connect to the keyboard automatically
when snapping the tablet to the keyboard.
Note: In case of connection failure, delete the pairing record from your device, and
repeat the procedures above.
Power Saving Mode
The keyboard case will enter sleep mode after being idle for 10 minutes. To activate it,
press any key and wait for 2 seconds.
Once installed in the case, release the bottom half of the iPad Air from the lower
edge bracket while keeping the top half installed in the corner brackets.
Lock the lower edge of the iPad Air into position on the magnetic strip to create an
upright viewing angle. The green Power Indicator will go on for 2 seconds.
Simultaneously press the Fn and Bluetooth keys to enter pairing mode. The blue
Bluetooth Indicator will start to flash rapidly.
Activate your device’s Bluetooth function and search for the keyboard case.
Once the Bluetooth keyboard case has been found, click on its name to connect.
Enter the password code as displayed on the screen.
Once the Bluetooth keyboard case has successfully connected to your device, the
Bluetooth Indicator will turn off.