User Manual
05 EN EN 06
• Earbuds rmware update: The earbuds rmware can be updated in the App. You will be informed
once the new version of rmware is detected when you connect the earbuds with the App.
Soundcore
Apple and the Apple logo are trademarks
of Apple Inc.
Google Play and the Google Play logo are
trademarks of Google Inc.
Download the Soundcore App for HearID,
UI customization and EQ settings.
Reset
Reset the earbuds if the earbuds cannot connect with each other properly or cannot connect
with your device properly.
1. Place the earbuds into the charging case and make sure they are being charged.
2. Keep the charging case open, then press and hold the button on the bottom of the charging
case for 10 seconds until the LED indicators on both earbuds ash red 3 times.
All the memory data will be cleared.
10”
3
Specifications
Specications are subject to change without notice.
Input 5 V 500 mA
Rated output power 5 mW @ 1% THD
Battery capacity 55 mA x 2 (earbuds); 500 mA (charging case)
Charging time
1.5 hours (for earbuds); 2 hours (for charging case
via USB); 3.5 hours (for charging case via wireless
charger)
Playtime
(varies by volume level and content)
7 hours (Totally 28 hours with the charging case)
Driver size 6 mm diamond coated driver x 2
Frequency response 20 Hz - 20 kHz
Impedance 16 Ω
Bluetooth version V 5.0
Bluetooth frequency 2402-2480 MHz
Bluetooth range 10 m / 33 ft
Qualcomm®aptX ™ Technical specications
Compression ratio: 4:1
Word Depth: Support 16 bit and 24bit
Decoding delay: Sample Rate 48kHZ<2ms
Dynamic range: 16bit>92dB, 24bit>120dB
Data rates: 352kbps
Decode mode: Stereo
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and
other countries. aptX is a trademark of Qualcomm Technologies International Ltd., registered
in the United States and other countries.