User Manual
LED behaviour (Earbuds)
Breathing white TWS connecting
Steady white for 1 second TWS connected
• When powered off, press and hold the multi-function button on both earbuds for 1
second, the earbuds will enter TWS connecting mode.
• When powered on and connected, place either one of the earbuds into the charging case
and close the case, you can keep using the other one.
• When powered on and connected, if either one of the earbuds is out of battery and
powered off, you can keep using the other one.
• When you are on a call, press and hold the multi-function button on either one of the
earbuds for 1 second, then this earbud will switch to be the primary earbud.
• When you are on a call, place either one of the earbuds into the charging case, the
microphone in the other earbud will be activated.
Bluetooth Pairing with your Device
The earbuds will enter pairing mode when powered on. You are requested to confirm the
connection when you see a pop-out screen.
2
1
3
Soundcore
Liberty 2
Soundcore
Liberty 2
Bluetooth Pairing Request
“Headset” would like
to pair with your Phone
Cancel Pair
Pair
LED behaviour (Earbuds)
Flashing white Bluetooth pairing
Steady white for 1 second Bluetooth connected
• In the pairing process, some devices are incompatible with Qualcomm True Wireless
Primary-Secondary dual pairing names, it may notice “connection unsuccessful” when you
tap “Pair” or even no screen popped out. Don’t worry and it will not inuence the using.
• Once successfully paired, the primary earbud connects with your device and transfers
signal to the secondary earbud, the latter one will not connect with your device. As a
result, in the Bluetooth pairing list on your device, it may indicate that only one side is
connected while the other side is not.
To pair with another Bluetooth device, place the earbuds back into the charging case and
make sure they are being charged, keep the case cover open, then press and hold the button
on the charging case for 3 seconds. The LED indicator on the right earbud will ash rapidly.
3
Bluetooth Pairing Request
“Headset” would like
to pair with your Phone
Cancel Pair
Pair
Soundcore
Liberty 2
Soundcore
Liberty 2
3”
R
1 2
• Each time you power on your Soundcore earphones, it will automatically connect to your
last successfully connected device if available within the Bluetooth range.
• Mono mode: When Bluetooth connected, you can use either one of the earbuds only by
putting the other one back into the charging case and closing the cover.
Wearing
1. Choose the ear tips and ear wings that t your ears the best.
2. Insert the earbuds into the inner canal of your ears.
3. Turn and nd the most comfortable position.
1 2 3