User's Manual

ManualsBrandsANKER ManualsElectronicsSoundsync Bluetooth Transmitter

Safety Instructions

• Do not drop, knock, or shake the device.

• Do not disassemble. Do not attempt to open the device.

• Keep the device dry and away from all types of liquids or moisture that will corrode the

electronic circuits. If the device gets wet, dry it immediately.

• Avoid extreme temperatures.

• Do not use outdoors during thunderstorms.

• Use original or certiﬁed cables only.

• Do not use any corrosive cleaner / oil to clean.

The device should be charged at least once a month to preserve battery life.

What’s Included

Anker Bluetooth

Transmitter

User Manual

Soundsync Bluetooth Transmitter

3.5 mm Audio

Adapter

micro USB

Cable

3.5 mm Audio

Cable

At a Glance

Multi-function Button

Multipoint Connection LED Indicator

LED Indicator

Volume Down

3.5 mm AUX Input

Volume Up

Micro USB Charging Port

• Charge the Bluetooth Transmitter before ﬁrst use.

• If Soundsync freezes, press and hold the multi-function button, insert the

Micro USB cable to start charging, then restart Soundsync.

LED Indicator Guide

Flashing blue twice Power on

Flashing red twice Power o

Flashing red and blue alternately Bluetooth pairing mode

Steady blue

Connected to a device / Connected to two devices

simultaneously

Flashing blue once every 2

seconds

Disconnected from a device

Flashing blue once every second Reconnected to a device

Steady blue (LED indicator

and Multipoint connection LED

indicator)

Two devices are connected simultaneously

Flashing red and blue alternately Pairing deleted

Using Your Soundsync

Turn on / o

ON Press and hold for about 3 seconds

OFF Press and hold for about 3 seconds

Connect Soundsync to a Bluetooth Device

1. When Soundsync is turned on, press the multifunction button twice to enter Bluetooth

pairing mode. The LED indicator will ﬂash red and blue alternately.

2. Enable Bluetooth on your Bluetooth headphones or speaker and pair it with Soundsync.

When successfully paired, the LED indicator will turn blue.

3. Connect Soundsync to your device using the provided 3.5 mm audio cable.

USER MANUAL

Soundsync Bluetooth Transmitter

For FAQs and more information, please visit:

Product Number: A8327

Soundsync Bluetooth Transmitter

5100500XXXX V01

Summary of content (2 pages)

PAGE 1
3S Safety Instructions USER MANUAL Soundsync Bluetooth Transmitter What’s Included At a Glance LED Indicator Guide Using Your Soundsync • Do not drop, knock, or shake the device. Flashing blue twice Power on • Do not disassemble. Do not attempt to open the device. Flashing red twice Power off • Keep the device dry and away from all types of liquids or moisture that will corrode the electronic circuits. If the device gets wet, dry it immediately. • Avoid extreme temperatures.
PAGE 2
Connect Soundsync to two devices at the same time If there is still no sound coming from your devices devices, turn off Soundsync and then reconnect two devices. If connection fails again, repeat the steps above. Charging Your Soundsync Specifications AUX mode Specifications are subject to change without notice. 1. Follow the steps in the “Connecting Soundsync to a Bluetooth device” section to connect Soundsync to the first Bluetooth headphone or speaker. 2.