User's Manual
MAINTENANCE
Anki OVERDRIVE track pieces are made of High Impact Polystyrene. To
clean the FlexTrack pieces, use one of the following:
1. water and clean sponge
2. non-sticky lint remover
3. microber cloth
When cleaning the tracks with water and clean sponge, always dry the
track with a microber cloth. Be sure to clean the entire surface of the
tracks instead of just cleaning the racing surface.
Do not use abrasive cleaners, soap, chemicals, or scrub pads, this will
irreparably damage the track.
Once unpackaged, do not expose tracks to high temperature
conditions such as direct sun light or hot car interiors. For best results,
use indoors only.
For best experience, we recommend cleaning the tracks before and
after playing Anki OVERDRIVE™.
TO CLEAN ANKI OVERDRIVE CARS, FOLLOW THESE STEPS
1. Open the tire cleaner pad that came in the Starter Kit, roll the tires
on the pad several times.
2. Flip the car over and locate the sensor.
3. Remove any dust or debris from the sensor using a cotton swab.
Do not use any chemicals such as rubbing alcohol, or any cleaning products.
WARRANTY
Your purchase of Anki OVERDRIVE comes with a one-year limited
warranty in US and UK, and a two-year limited warranty in the EU.
The warranty covers against manufacturing defects. It does not cover
abuse, alteration, theft, loss, unauthorized and/or unreasonable
use, or normal “wear and tear.” During the warranty period, Anki
will make sole determination of a defect. If Anki determines a defect,
Anki, at its sole discretion, will repair or replace the defective part or
product with a comparable part. This does not affect your statutory
rights. For full details, safety updates, or support, see anki.com/support.
5