User Manual

Page 12 of 20
With the Battery Charger unplugged from the power point, plug the small pin
plug into the side of the Battery as shown.
Plug the Battery Charger into the power point and switch on.
During Charging, the indicator light will glow Red.
When the battery is fully charged, the indicator light will glow Green.
Switch off and unplug the battery charger from the power supply.
Remove the small pin plug of the battery charger from the vacuum cleaner.
When fully charged, the Vacuum Cleaner is ready for use.
NOTE: NEVER BLOCK ANY VENTS OR OPENINGS.