User Manual

Page 16 of 20
Wash the filter in warm mild soapy water, rinse in clean fresh cold water and
let completely dry.
DO NOT scrub the filter or place in a dishwasher.
DO NOT use a hair drier to dry the filter.
Refit the Filter (or replace with a new one) in the reverse method used for
disassembly.
When refitting the lid, there are markings on the
Lid and Dust Canister which need to be
aligned.
When aligned, push the lid down and rotate
clockwise until the markings show the lid is
locked as shown.
9.2 Cleaning Dust Canister
Remove the dust canister as described previously and remove the Filter.
Remove the inner component by grasping it and pulling straight up and
out.
Clean the Dust canister with a damp (NOT WET) cloth and dry off after.
DO NOT get the electrical contacts on the back of the dust canister wet.
DO NOT immerse the Dust Canister in water.
The inner components and lid can be washed in warm mild soapy water.
Then rinse in clean fresh cold water and let completely dry.
DO NOT place in a dishwasher.