User Manual

Page 17 of 20
DO NOT use a hair dryer to dry. Use a dry cloth or paper towel.
Refit the components in the reverse method used for disassembly.
IMPORTANT: The inner component must be fitted in a certain position.
There are three location tabs which must be aligned in their
corresponding slots as shown.
9.3 Cleaning the Vacuum Cleaner Body and Tools
Do not clean the vacuum cleaner, components or accessories using
petrol or any other flammable liquid or solvents, etc.
Clean only the outside of the vacuum cleaner.
Use only a moist cloth and mild detergent for cleaning the vacuum
cleaner, components and accessories.
After cleaning, wipe off the moisture on vacuum cleaner, components and
accessories with a dry cloth.
Do Not place accessories / components in a dishwasher.
9.4 Cleaning the Motorised Floor Head
The Rotary Brush in the floor head can be removed for easy cleaning and
removable of hair etc.
Ensure the Floor Head is removed from the extension tube or vacuum
cleaner.
Turn over so that the bottom face is facing up.
Large Tab
Small Tab
Small Tab