User Manual

Page 7 of 20
5 Assembly Method
Please Note: Always remove the Battery Charger from the power socket
before assembly.
5.1 Assembling the Extension Tube
Insert the end of the Extension Tube into the mating hole ensuring the locking
tab is aligned, then push inward until it locks into place.
5.2 Removing the Extension Tube
To remove the Extension Tube, grasp the Tube, press the locking tab down
to release then pull the hose straight out.
5.3 Attaching the Motorised Floor Head
To attach the motorised floor head to the end of the extension tube, insert
the end of the Floor Head into the end of the Extension Tube, ensuring the
locking tab is aligned, then push inward until it locks into place.