User's Manual

NaviCam Small Bowel Capsule Endoscopy System
User Manual P a g e |
21
ANKON Technologies Co., Ltd. AKQWO-YF-018 Rev A/1
Figure 3-7: Successful Uninstallation Dialog Box
3.3 Basic Software Operation
1. Connect the data recorder to the PC installed with the ESView software, open the ESView
and create a new case, and enter and save the basic information of the patient in the data
recorder.
2. After confirming the patient information, turn on the capsule, and the images the capsule is
capturing and displayed on the Rtdisplay interface. Check if the capsule image display is
normal and if the capsule voltage meets the examination requirements. After confirmation,
operate according to the examination manual, and help the patient swallow the capsule.
3. After the examination is complete, connect the data recorder to ESView software and export
the image data from the recorder and generate a report after viewing the images.
The chart below (Figure 3-8) shows the workflow of the system.