User's Manual

NaviCam Small Bowel Capsule Endoscopy System
User Manual P a g e |
29
ANKON Technologies Co., Ltd. AKQWO-YF-018 Rev A/1
endoscope has been received.
b) Green LED does not light, red LED lights – indicates no signal from capsule endoscope
has been received.
c) Green LED does not light, red LED flashes – indicates capsule endoscope signal has been
received, but no image data has been received.
4.3 Data Export
1. In the main software interface, select “Tool”

”Data export” in the menu to access the data
export interface (Figure 4-5)
Figure 4-5: Data Export Interface
2. The data export interface is mainly used to export image data captured by the capsule
endoscope to the computer. This interface supports two export modes. One is quick export,
which exports the data as a raw data file with suffix *.ankon. *.ankon files cannot be opened
by ESView until being parsed to video files. The quick export mode is applicable when it is
needed to export image data of the last patient quickly and prepare the data recorder for the
next examination. The other export mode is direct export, which exports and parses the data
as a video file that can be opened by ESView software.
3. To use the direct export mode, select “Export and convert data into video file” and click
“Start export”. The image data will be exported from the data recorder as a video file that
can be directly opened by ESView.
4. To use the quick export mode, select “Export data as RAW file” and click “Start export”. The
image data will be exported from the data recorder as a raw data file with suffix *.ankon. To
convert raw data file to video file, select “Convert existing RAW file into video files” and click