Application Guide

Notes about PIR detection:
1). When you set the PIR as Disabled, you will not record and receive any motion triggered events.
2). To capture as much footage as possible once motion is detected, we recommend setting the
PIR detection sensitivity to high.
3). Try to capture more the beginning of the triggered event,please adjust your camera angle a bit
closer to your aimed spot
4). We recommend to set sensitivity at "Low" to reduce false alerts and save the battery power in
noisy environments.
1). Select the clip duration recorded to micro SD card storage or cloud storage once motion is
detected.
2). Always: If this option is selected, the camera will not enter standby mode and will keep
recording continuously until battery or storage space runs out ( 60 seconds per file)
P.S.: When you set the active time,the spotlight will turn up with the same time length
when motion was triggered at night.
⑤. Active time
Page 12
When you choose Enable, the Blue LED will light up to indicate when you operate the camera as it
should be. When you choose Disabled, the Blue LED will not light up to indicate the operations or
trigger motions. It is recommended to set it as the default.
⑥. LED indicator
Active Time Cloud Video Length SD card video length
15s 10s 15s
30s 20s 30s
60s 30s 60s