User manual

17
3.11 Magnification
Set Real Time Magnification
If the Dino-Lite is used in a way that the magnification rate will not be changed and the focus
dial will not be adjusted, this function could help you enter the given magnification rate to each
picture taken after this function is enabled.
When “Set Real Time Magnification” is selected, this function will open a text box on the top
right of the DinoCapture screen where you can input the magnification rate.
To determine the magnification value of the image, refer to the reading on the center of the
focus dial indicated by a small node. This constitutes the magnification value for the captured
image.
Set Magnification After Capture
When activated, this option will bring up a box prompting you to enter the magnification every
time after capturing each picture. This option could help you do measurements after taking
multiple pictures.
Show
When activated, the “Show” option will show the magnification rate on the images captured.
Imprint
The imprint option will allow you to imprint the notes keyed into the dialog box that opens at the
top of the screen.