User Manual

4. Setup bluetooth
Before starting the next steps below, please confirm that the Bluetooth switch is at position
On.
Detail about turn on the Bluetooth switch, please refer to Chapter 1.2
4.1 Turn on Bluetooth broadcast
Connect ANNE PRO 2 to a new host (Computer, Mobile, Pad etc), need Bluetooth pairing. To
do this, need turn on Bluetooth broadcast first.
FN2 + 1 （5 Seconds） = Turn on Bluetooth broadcast on position 1
FN2 + 2 （5 Seconds） = Turn on Bluetooth broadcast on position 2
FN2 + 3 （5 Seconds） = Turn on Bluetooth broadcast on position 3
FN2 + 4 （5 Seconds） = Turn on Bluetooth broadcast on position 4
4.2 Switch Host
Connect or switch ANNE PRO 2 to a paired host
FN2 + 1 = Switch to host saved on position 1
FN2 + 2 = Switch to host saved on position 2
FN2 + 3 = Switch to host saved on position 3
FN2 + 4 = Switch to host saved on position 4