Warranty

This solar light is a green and environment-friendly product. It is

convert the sunlight into electrical energy and then charge the AA

Ni-Cd rechargeable batteries during the day. A light sensor turns on

the light automatically at night.

Ideally, the light should be in a place to capture the maximum

amount of sunlight. The light source is super-bright LED’s which can

work up to eight hours at night after a full sunny day of charging.

INSTRUCTIONS:

1. To prolong their life, the batteries are packed separately and are not

pre-installed in the solar light. Remove the two battery doors with a

small Phillips -head

screwdriver, insert the

batteries and replace the

battery doors.

2. Unscrew the ornament from

the top of your flagpole,

place the solar light atop

the pulley assembly, with

the solar collecting panels

facing up, and replace the

ornament. See illustration.

ORNAMENT

THROUGH HOLE

FOR 1/2 IN. ROD

SOLAR CELLS

LIGHTS

PULLEY

ASSEMBLY

FLAGPOLE

Flagpoles

Light

Solar

for

Important: See precautions on reverse

PAGE 1
Solar for Light Flagpoles This solar light is a green and environment-friendly product. It is powered by solar energy through the solar panels. The panels convert the sunlight into electrical energy and then charge the AA Ni-Cd rechargeable batteries during the day. A light sensor turns on the light automatically at night. Ideally, the light should be in a place to capture the maximum amount of sunlight.
PAGE 2
PRECAUTIONS 1. Do not touch the surface of the solar collecting panels. 2. You can check the operation of the light by simply covering the solar panels completely to activate the light sensor. We suggest that you test the light in this manner before you install the light on the flagpole. 3. Remember that the light is designed to work when it is dark. If there is high ambient lighting nearby then the LED’s may be very dim or not turned on at all. 4.