FR EN DE IT 353 ES PT EL NL DA NO FI SV CS PL SL SK LT BG RU HU RO TR HR LV ET cod.
FR Lire ce manuel avant l’installation/utilisation du nettoyeur en faisant très attention aux INSTRUCTIONS POUR LA SÉCURITÉ EN Read this manual through carefully before installing/using the cleaner, paying special attention to the SAFETY INSTRUCTIONS DE Lesen Sie dieses Handbuch vor der Installation und dem Gebrauch des Hochdruckreinigers aufmerksam durch und achten Sie besonders auf die SICHERHEITSANWEISUNGEN IT Leggere questo manuale prima dell’installazione/uso dell’idropulitrice, prestando particol
E3 E1 C1 C2 B4 A1 A2 A3 C4 B6 B5 B2 D B1 B3 1
1 2 3 4 6 5 Ø13 7 2
F E 3 D 1 I H I 2 0 H H 4
L 5 3 x 1,5 mm2 230 S L1 N 4 1 3 x 2,5 mm2 r 5 a T 2 M 1~ n b P=O 25 ÷ 50 m 1 ÷ 25 m Volt b m C NA NC S1 I C
10 English B1 B2 B3 B4 B5 B6 1 GENERAL INFORMATION (FIG.1) EN 1.1 1.2 Use of the manual This manual forms an integral part of the appliance and should be kept for future reference. Please read it carefully before installing/ using the unit. If the appliance is sold, the Seller must pass on this manual to the new owner along with the appliance. 1.2.1 1.3 1.4 2.4.1 Delivery The appliance is delivered partially assembled in a cardboard box. The supply package is illustrated in fig.1.
English 4 ADJUSTMENT INFORMATION (FIG.3) 4.1 4.2 4.3 4.4 Water flow is adjusted by regulating the nozzle (E). Adjusting the detergent (on models with this feature) Detergent flow is adjusted using the regulator (F). Adjusting the detergent pressure 5.5 Set the adjustable nozzle on " " to deliver detergent at the correct pressure (on models with this feature). Adjusting the pressure (on models with this feature) The regulator (G) is used to adjust the working pressure.
12 English 7 TROUBLESHOOTING EN Problem Pump does not reach working pressure Possible causes Nozzle worn Water filter fouled Water supply pressure low Air being sucked into system Air in pump Pressure drops during use Adjustable nozzle not positioned correctly Water intake from external tank Intake water too hot Nozzle clogged Insufficient power supply Motor “sounds” but fails to start Voltage loss due to use of extension cable Appliance not used for a long period of time Problems with TSS device
87 DÉCLARATION DE CONFORMITÉ FR DECLARATION OF CONFORMITY EN KONFORMITÄTSERKLÄRUNG DE Nous déclarons, en assumant la pleine responsabilité de cette déclaration, que le produit est conforme aux normes suivantes et aux documents correspondants We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents Wir erklären in alleiniger Verantwortung, dass das Produkt den folgenden Normen und normativen Dokumenten entspricht: EN 60335-1;
