User Manual

Ambiane SP16 Recessed

3. Installation

The Ambiane SP16 must be installed by a qualified electrician in accordance with all national and local electrical

and construction codes and regulations.

Always switch off power supply of the control unit before connecting or disconnecting the control unit or the

LED unit.

The lower ceiling (or another structure) intended for installation of the Ambiane(s) SP16 must safely hold at

least 5 times weight of the Ambiane(s) SP16 placed on it.

1. Prepare a circular opening in the lower ceiling. Max. thickness of the lower ceiling can be 18 mm (0.71 in).

2. If you install Ambiane SP16 Recessed with yoke.

Remove the top part of the yoke (11) from the unit by unscrewing two screws (12) with washers.