User Manual

Ambiane SP16 Recessed
6
Fasten the top part of the yoke (11) on the ceiling or another structure by means of three openings in the yoke.
3. Fasten the control unit (1) on the ceiling by means of two holes in the housing of the control unit.
4. Install the terminal block (2) on the LED unit cable.
5. Install the terminal block (3) on the DMX cable and connect it to the PCB RB 3729 of the control unit (1).
6. Install the terminal block (4) on the supply cable connect it to the PCB RB 3729 of the control unit (1).
7. Install another terminal blocks on cables according to requirements of current installation.