QR code for user manual Version 2.
ArcSource Outdoor 4 MC The ArcSource Outdoor 4 MC is a Cree MC-E RGBW multichip based high powered multicolored LED fixture. The unit can be used for large scale applications, as well as used for individual illuminating needs. 1.Attention Consider the respective national norms during the installation! Do not install the unit near naked flames. Avoid using the unit in locations subject to possible impacts. Do not attempt to dismantle or modify the unit.
. Connection ArcSource Outdoor 4 MC Adapter cable Chogori -Chogori ,(it is not a standard part of delivery) Adapter cable Chogori -RJ45, for indoor use only (it is not a standard part of delivery) Connection to the ArcPower driver CE: ArcPower driver US: Power source LVLE 23
.Technical specifications LED Device: Available beam angles: Colour variants: Max. Current per Colour: Max.
7.
Land spike 2 ASO 4 MC 100mm Land spike 1 ASO 4 MC 500mm Land spike 2 ASO 4 MC 500mm 6
Land spike 3 ASO 4 MC 500mm Land spike 1 ASO 4 MC 100mm 7
. Installing the ArcSource Outdoor 4 MC onto a land spike Land spike 1 ASO 4 MC 100mm / Land spike 2 ASO 4 MC 100mm 1. Hammer the sharp part (1) of the land spike into ground (hammer the centre of the sharp part, not the edge). 2. Screw the threaded bar (2) into the sharp part (1) and secure it with the socket head M5x5 (3). 3 .Put the cover (4) on the threaded bar (2). 4. Put the pipe 36.5 mm (5) on the threaded bar (2). 5. Put the cable holder (6) on the threaded bar (2).
Land spike Land spike 3 ASO 4 MC 500mm 1. Hammer the sharp part (1) of the land spike into ground (hammer the centre of the sharp part, not the edge). 2. Screw the threaded bar (2) into the sharp part (1) and secure it with the socket head M5x5 (3). 3 .Put the cover (4) on the threaded bar (2). 4. Put the pipe 36.5mm (5) on the threaded bar (2). 5. Put the cable holders (6) on the threaded bar (2). 6. Put the pipe 198mm (7) on the threaded bar (2). 7. Put the ArcSources holder (8) on the threaded bar (2).
9. Installing the top hat (half top hat) 1. Unscrew the Allen head screw (1) from the ArcSource Outdoor 4 MC housing. 2. Insert the distance part (4) into the housing of he ArcSource Outdoor 4 MC and place the top hat (half top hat) (5) on the housing (6). 3. Screw the Allen head screw (1) back to the housing with a spring washer (2) and flat washer (3). The small hook (7) ,which securing the top hat (half to hat) to the housing, has to be placed between the distance part (4) and the flat washer (3) .
