Instruction Manual

INSTALLATION INSTRUCTIONS
ARCSOURCE OUTDOOR 4MC PIXEL
ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: [phone] | E-mail: [e-mail] | www.anolislighting.com
VERSION 2.0 / 02_2022
10
Twin Wall Cover (Flat / Round)
Flat Round
Unscrew four M3x6 screws from Twin Wall Cover and remove
the cover from the luminaires base holder.
1 2
3 4
Prepare openings for cables in the mounting surface, minimal
diameter of 21mm, and if necessary also two mounting holes
according to disposition above.
Fasten the luminaires (without their bases) to the holder with
two M5x12 screws via two outer mounting holes.
Fasten the holder with luminaires to the mounting surface via
two inner holes and fasteners suitable to mounting surface.