Instruction Manual

INSTALLATION INSTRUCTIONS
ARCSOURCE OUTDOOR 4MC PIXEL
ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: [phone] | E-mail: [e-mail] | www.anolislighting.com
VERSION 2.0 / 02_2022
2
STEP 2B
INSTALL WITH STANDARD BASE AND ADAPTOR
Fasten the base of luminaire into the mounting surface with
three screws.
Assemble the 31mm adaptor between the luminaire and the
base. Locking pin of the adaptor has to placed correctly into
matching part of the luminaire. Screw the luminaire, adaptor
and base together with M5x45, spring washer and standard
washer.
Unscrew M5x14 from the bottom part of base and disassemble
the base from the luminaire.
1
2 3
STEP 2A
INSTALL WITH STANDARD BASE
Fasten the base of luminaire into the mounting surface with
three screws.
1. standard washer
2. spring washer
3. screw