Instruction Manual

INSTALLATION INSTRUCTIONS
ARCSOURCE OUTDOOR 4MC PIXEL
ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: [phone] | E-mail: [e-mail] | www.anolislighting.com
VERSION 2.0 / 02_2022
3
STEP 2C
INSTALLATION OF 100MM ADAPTOR STAND AND MOUNTING
Unscrew M5x14 from the bottom part of base and disassemble
the base from the luminaire.
Screw the 100mm adaptor into luminaire by bolt on adaptor.
Fasten the base to the adaptor with original M5x14 screw and
washers.
Fasten the base of luminaire into the mounting surface with three screws.
1 2
3
1. standard washer
2. spring washer
3. screw