Instruction Manual

INSTALLATION INSTRUCTIONS
ARCSOURCE OUTDOOR 4MC PIXEL
ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: [phone] | E-mail: [e-mail] | www.anolislighting.com
VERSION 2.0 / 02_2022
7
1.Underground part of Land spike (1) should be placed per-
pendicularly into the ground. (if you need to use tools to insert
spike in the ground, use of some protective layer and applying
pressure in the middle is recommended to prevent damaging
of land spike)
2. Screw the threaded bar (2) onto the underground part of
spike (1) and fasten it with the socket head M5x5 (3).
3. Slide the cover (4) on the treaded bar (2) and the socket
head (3).
4. Slide the 36.5mm pipe cover (5) on the threaded bar (2).
5. Slide two cable holders (6) on the threaded bar (2).
6. Slide the 198mm pipe cover (7) on the threaded bar (2).
7. Slide the ArcSources holder (8) on the threaded bar (2).
8. Slide the 198mm pipe cover (7) on the threaded bar (2).
9. Slide the cable holder (6) on the threaded bar (2).
10. Screw the nut with mount (9) on the threaded bar (2).
11. Fasten three luminaires to their holders (8,9) with M5x14
screws from the bottom of each luminaire and its mount.
12. Pass cables through the cable holders (6).
Land spike 3 ASO 4 MC Pixel 500 mm