Instruction Manual

INSTALLATION INSTRUCTIONS
ARCSOURCE OUTDOOR 4MC PIXEL
ROBE lighting s. r. o. | Palackeho 416 | 757 01 Valasske Mezirici | Czech Republic | Tel.: [phone] | E-mail: [e-mail] | www.anolislighting.com
VERSION 2.0 / 02_2022
8
STEP 3
CONNECTION
T-connector
Male connector
Female connector
Connect luminaires to each other and to power supply via
T-connectors and cables.
Recommended power supplies:
ArcPixel Rack Unit, ArcPixel Power.
Connection of ArcSource Outdoor 4MC Pixel is provided by
50cm long cable with male connector. (variety of cable adap-
tors is available)
Before ASO 4MC Pixel are connected to power source, you
have to connect the Active Terminator on the last luminaire in
the row. That is necessary for correct identication of every
single ASO 4MC Pixel and this has to be done for setup of eve-
ry ASO 4MC Pixel row. You can change the Active Terminator
box for Passive Terminator box, when the set up is nished.
Passive Terminator
Active Terminator