User Manual

Eminere Inground Wireless DMX
6
The supply cable to the mounting sleeve and power/data cable from the mounting sleeve must be placed
in a protective tube (12).
6. After connecting cables to the junction box (8), screw the Eminere Inground (13) to the mounting sleeve (1)
by means of the four countersunk- allen head bolts M5x25 (14). The screws (14) must be tightened
smoothly with torque of 4Nm. Do not use impact wrench.
7. Screw the cover plates (15), (22) on the mounting sleeve (1) by means of the six countersunk- allen head
bolts M5x30 (16). The crews (16) must be tightened smoothly with torque of 4Nm. Do not use impact
wrench.