User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 163
Chapter 18 System Maintenance
18.1 Storage Device Maintenance
18.1.1 Configuring Disk Clone
Purpose
Select the HDDs to clone to the eSATA HDD.
Before You Start
Connect an eSATA disk to the device.
Step 1 Go to Maintenance > HDD Operation > HDD Clone.
Figure 18-1 HDD Clone
Step 2 Check the HDD to clone. The capacity of the selected HDD must match the
capacity of the clone destination.
Step 3 Click Clone.
Step 4 Click Yes on the popup message box to continue creating the clone.