User Manual

5. It will automatically search and add cameras
6. A few seconds later the picture will be displayed on the screen
7. Click "Exit" after all cameras are connected
Then, you can unplug and move the camera to anywhere you want. When it gets
power, it will automatically reconnect. (Camera needs to be in the WiFi range, please
refer to FAQ #Q5)
② Delete channel
Delete channel is only used when you need a channel for a new camera. In Video
Manage, select a channel from below box, click delete. The camera will be deleted
from the channel. You can then use 13.1 Match code to add a new camera to the
channel.
③ Name cameras
Right click to show Main Menu → System Setup → Channel Setup→Channel OSD →
Camera Title; You can name each camera here.
Tips: The system can handle very long distance. However, obstacles (like walls) can
cause a weak signal. Try to avoid obstacles between connected devices if at all
possible.