User Manual

Please connect the wireless camera system as pictured below.
1. Screw on antennas to cameras.
2. Connect the monitor/ TV to the NVR via its HDMI or VGA port
3. Connect the NVR and cameras to power (bigger 12V 2.5A or 12V 3A power
adapter for NVR, smaller 12V 1A or 12V 2A for cameras).
4. See FAQ #Q2 if you don't get any display on the screen; skip to 5 if you get
display.
5. About 1-2 minutes, you should see cameras' images on the screen.
6. Connect the NVR's WAN port to your router with a network cable.
7. Plug the mouse (included) into a USB port on back of NVR. You should then be
able to operate the system.
7. Network setting -Get the system ONLINE
Without Internet connection, the system will still allows you to do everything locally.
However, getting the system ONLINE makes it capable of doing more remotely using
your smart phone or PC.
When you have finished connecting and see the cameras' images on the screen,
please click “ok” to continue.
Default ID: admin
Password: none (means leaving the password empty, just click OK)