Installation Manual

2: Check it on monitor which connected the system. Right click your mouse to
"System setup---General setup--HDD Setup", you will get the HDD information.
3: Open the NVR box, double check if your system has a pre-installed hard drive. If
your NVR is Cylindrical, you can check by the following link of video:
https://drive.google.com/open?id=1o9h47TlEvBjXmMCGGV3HhtuNgMv4KywS
If you still cannot find the hard drive, you can contact our tech support to have a
further checking via [e-mail].
Q2: When HDD is full, do I need to delete recordings?
A:No need, It's loop recording, that means it will auto overwrite when the hard drive
is full.
Q3: Which hard drive does Wireless security systems use?