User Manual
Table Of Contents
- Intr
- 1.Product features overv
- 1.1Product introduction
- 1.2 Product parameters.
- 1.3Functional features
- 2.Operating instructions
- 2.1The front panel expla
- 2.2Rear Panel Interface
- 2.3The mouse operation i
- 2.4Input method instruct
- 2.5The remote control ope
- 2.6Interface specificatio
- 2.6.1Interface elements s
- 2.6.2Commonly used butto
- 2.7Menu description
- 3.Installation and conne
- 3.1Installation Notes
- 3.2Prepare before instal
- 3.3The camera placed in the
- 4.System function introdu
- 4.1Starting up/Login/Log
- 4.1.1 Starting up
- 4.1.2 Login
- 4.1.3 Logout
- 4.1.4 Restart
- 4.1.5 Close the screen o
- 4.1.6 Turn off
- 4.2Boot wizard
- 4.3 Video management
- 4.3.1 Search device
- 4.3.2 Add device
- 4.3.3 Advanced setup
- 4.3.4.Delete device
- 4.3.5Repeater function
- 4.3.6Edit channel
- 4.3.7Encoding setup
- 4.3.8Code stream value
- 4.3.9 Channels in detail
- 4.3.10 Channel OSD
- 4.3.11 Camera
- 4.4 Network Setup
- 4.4.1.Network Setup
- 4.4.2.Dynamic DNS
- 4.4.3.FTP26
- 4.4.4.E-Mail
- 4.4.5.PPPoE
- 4.4.6.3G
- 4.4.7.Wireless setup
- 4.5 PTZ setup
- 4.5.1 PTZ parameter setu
- 4.5.2 PTZ control operat
- 4.5.3 PTZ automatic crui
- 4.6 Video
- 4.6.1 Manual video
- 4.6.2 Timing video
- 4.6.3 The motion detecti
- 4.6.4 Alarm video
- 4.7 Video playback
- 4.7.1 Quick playback
- 4.7.2 Regular playback
- 4.8Video backup
- 4.9 Alarm
- 4.9.1Motion detecting al
- 4.9.2Video loss alarm
- 4.10 General setup
- 4.10.1General setup
- 4.10.2Timeset
- 4.10.3Screen setup
- 4.10.4Hard disk setup
- 4.11Device maintenance a
- 4.11.1 System information
- 4.11.2 User management
- 4.11.3 Restore the factor
- 4.11.4 System maintenanc
- 4.11.5 Software upgrade
- 4.11.6 IPC maintenance
- 5WEB access
- 5.1 Introduction
- 5.2 LAN Access
- 5.2.1 Login
- 5.2.2 Preview
- 5.2.3 Playback
- 5.2.4 Configuration
- 5.3 E-seenet access
- 5.3.1 E-seenet ID login
- 5.3.2 The user name logi
- 6.Mobile terminal access
- 7. Appendix
- 7.1Hard disk capacity un
- 7.2Video required capaci
- Introduction
- 1.Product features overview
- 2.Operation explanation
- 3.Installation and connection
- 4.System function introduction
- 4.1Starting up / login / logout / restart / close
- 4.2Boot wizard
- 4.3 Video management
- 4.3.1 Search for device
- 4.3.2 Add device
- 1. Code matching instructions:
- 2:Code matching methods:
- 4.3.3 Advanced setups
- 4.3.4.Delete device
- 4.3.5 Repeater setup
- 4.3.6.Edit Channel
- 4.3.7.Encoding setup
- 4.3.8 Stream value
- 4.3.9 Channel details
- 2、Click Refresh, you can search the camera in curr
- 4.3.10 Channel OSD
- 3, Select the display setup, enter the location of
- 4.3.11 Camera
- 4.4 Network setup
- Click Reset to restore the information of the wire
- 4.5 PTZ setup
- 4.6 Recording
- 4.7 Video playback
- 4.8 Video backup
- 4.9 Alarm
- 4.10 General Setups
- 4.11 Equipment maintenance and management
- 5WEB Access
- 6.Mobile access
- 7.Appendix
Wireless NVR Kit Manual
3
Shutter
1/25s to 1/25,000s
Lens
4/6mm
OSD
Date Time & Title
White Balance
Auto
Day&Night
IR cut filter with auto switch
3D-DNR
Auto
Mirror/Flip
On / Off
smart stream
Dual-stream:
1280x720@15fps
640x360@15fps
Dual-stream:
1280x960@15fps
640x360@15fps
Dual-stream:
1920x1080@15fps
640x480@15fps
Signal /noise rate
> 39.1 Db
Interface
RJ45 / WIFI 802.11b/g/n
General
Specification
Anti-thunder Level
Standard IEC61000-4-5
Working
Temperature/Humidity
-10℃ to +50℃ / 30% to 80% RH
Working
Temperature/Humidity
-20℃ to +60℃ / 20% to 90% RH
Power Input
DC12V-1A
Power consumption
≤6W
Size
66*180mm
Weight
500g
Level of Protection
IP66
1.3Functional features
• H.264,4ch real-time D1,1080P wireless nvr;
• Built-in high-performance and high-stability wireless Wi-Fi routing module, supports 802.11b / g / n protocol,
150Mbps;
• Can automatically access the Wi-Fi network camera through the network cable;
• Video preview / recording / playback / backup;
• User-friendly (wireless simple matching, setup wizard, commonly used function menu, E-see net );
• Support ONVIF、N1 and IPC Access protocol;
• Supported network service functions:P2P,DHCP,DDNS,PPPoE, E-Mail,FTP and so on;
• Support a variety of alarm triggering (video loss / motion detection, etc.) and alarm output (voice / E-Mail / FTP,
etc.);
• Support Android / Apple mobile (or tablet) remote (LAN and Internet) access and control;
• Support PC (client or browser) remote (LAN and Internet) access and control;
• Support IPC configuration (coding control, image adjustment, OSD display, etc.);