User Guide

Installation Driver Installation
MA24106A UG 2-5
8. Connect the MA24106A power sensor to the USB port of the PC with the supplied USB cable. The status
LED will light green indicating that the sensor is turned ON.
9. When the Found New Hardware Wizard installation screen appears, select No, not this time to search for
software, and then click Next. If the Wizard does not start, refer to Appendix C, “Serial Port
Compatibility” for troubleshooting information.
10. Select Install from a list or specific location (Advanced), and then click Next.
Figure 2-8. Found New Hardware Wizard
Figure 2-9. Found New Hardware Wizard