Specifications

http://www.anritsu.com 371
NETWORK ANALYZERS
7
Model/Order No. Name
Main frame
36581NNF AutoCal
®
(N type, 40 MHz to 18 GHz)
36581KKF AutoCal
®
(K type, 40 MHz to 20 GHz)
36582KKF AutoCal
®
(K type, 40 MHz to 40 GHz)
36581NNF/1 AutoCal
®
(N type, 10 MHz to 6 GHz)
36581KKF/1 AutoCal
®
(K type, 10 MHz to 6 GHz)
Test port converter sets
36583S SMA type
36583L 3.5 mm type
36583K K type
Service
2300-228 Re-characterization software
AutoCal
®
with 36583X
Specifications
All specifications are guaranteed over the ambient temperature
range of 23˚ ±3˚C.
•Directivity
•Source match
Frequency
AutoCal
®
module
0.01 to 0.2 GHz 38 dB 36 dB
0.2 to 20 GHz 38 dB 36 dB
20 to 40 GHz 34 dB 32 dB
Frequency
AutoCal
®
module AutoCal
®
with 36583X
0.01 to 0.2 GHz 34 dB 32 dB
0.2 to 20 GHz 34 dB 32 dB
20 to 40 GHz 26 dB 24 dB
•Reflection tracking
Frequency
AutoCal
®
module AutoCal
®
with 36583X
0.01 to 0.2 GHz ±0.15 dB ±0.20 dB
0.2 to 20 GHz ±0.20 dB ±0.25 dB
20 to 40 GHz ±0.25 dB ±0.30 dB
•Transmission tracking (Internal thru mode)
Frequency
AutoCal
®
module AutoCal
®
with 36583X
0.01 to 0.2 GHz ±0.15 dB ±0.20 dB
0.2 to 20 GHz ±0.20 dB ±0.25 dB
20 to 40 GHz ±0.25 dB ±0.30 dB
•Transmission tracking (True thru mode)
Frequency
AutoCal
®
module AutoCal
®
with 36583X
0.01 to 0.2 GHz ±0.10 dB ±0.15 dB
0.2 to 20 GHz ±0.10 dB ±0.15 dB
20 to 40 GHz ±0.20 dB ±0.25 dB
General
•
Serial input connector
9 pin D-sub allowing PC or direct VNA control. (Serial cable supplied)
•
Power supply input connector
+5 V, ±15 V for the electronic modules, and +5 V, +24 V for the
electromechanical module. The modules are keyed against plugging
the wrong supply. The appropriate DC supply is supplied with each
AutoCal
®
module. These universal supplies will operate at either 110
V or 220 V input voltages.
•
Power LED
On when the DC supply is plugged in.
•
Operate LED
On when the module’s internal temperature has stabilized at an op-
timum temperature for accurate calibrations.
•
Dimensions
155 (W) x 65 (H) x 90 (D) mm (6 W x 2.5 H x 3.5 D in.)
Environment
•
Operating temperature
18˚ to 28˚C
•
Storage temperature
–20˚ to 70˚C
•
Relative humidity
5% to 95% at 40˚C
•
EMC
Conforms to the EMC Directive, 89/336/EEC
Conducted and Radiated Emissions-
CISPR 11: 1990/EN55011: 1991,
Group 1 Class A
Immunity-
IEC 1000-4-2:1995/EN 50082-1: 1992,
4 kV CD, 8 kV AD
IEC 1000-4-3:1995/EN 50082-1: 1992,
3 V/m, 26-1000 MHz, 80% 1 kHz AM
IEC 1000-4-4: 1995/EN 50082-1: 1992,
.5 kV SL, 1 kV PL
AutoCal
®
may be sent to the nearest service center for re-characterization, or
a service engineer may perform the task at the customer’s site. With the aid of
the re-characterization software, a Lightning or Scorpion family VNA, and a tra-
ditional cal kit, the customer can re-characterize his own AutoCal
®
module,
minimizing downtime.
Ordering information
Please specify model/order number, name, and quantity when ordering.