Specifications

NETWORK ANALYZERS
382 For product ordering information, see pages 4 – 10
•
High-accuracy group delay measurement
The group delay characteristics can be measured with a high degree
of accuracy at a resolution of 1/10,000 of the measurement range.
Group delay characteristics
•
Limit test function
Device pass/fail evaluation can be performed in real-time using the
single and segmented limit test functions.
Filter pass/fail evaluation using limit test
•
Filter measurement
Filter analysis functions
Filter characteristics such as 3 dB bandwidth, center frequency (fo),
in-band ripple, out-of-band attenuation, etc., are digitally processed
and analyzed at high speed. User can easily enter or change default
values using filter set up menu.
Measurement using filter functions
Set up menu for filter functions
Simultaneous in-band and spurious response data display
Previously, spurious detection and passband measurement required
switching of the measurement setup. The MS4630B alternate sweep-
ing function permits simultaneous display of the measured passband
and spurious band data. The very short switching time greatly im-
proves the measurement efficiency.
Spurious measurement using alternate sweeping
•
Resonator measurement
High-speed measurement of resonator characteristics
The MS4630B has a number of dedicated waveform analysis func-
tions to improve the evaluation efficiency of resonators. Resonator 1
analyzes the resonance frequency (Fr) and the resonance imped-
ance (Zr). Resonator 2 is able to measure resonator equivalence in
addition to the parameters for Resonator 1.
Resonator 1 measurement