Specifications

http://www.anritsu.com 355
NETWORK ANALYZERS
7
Ordering information
Please specify model/order number, name, and quantity when ordering.
Model/Order No. Name
Main frame
MS4622A 10MHz – 3GHz transmission/reflection
MS4622B 10MHz – 3GHz active reversing
MS4623A 10MHz – 6GHz transmission/reflection
MS4623B 10MHz – 6GHz active reversing
Options
Option 1 Rack mount kit with slides
Option 2 Time domain
Option 3A 2nd internal source (3 GHz source) + 3rd port
Option 3B 2nd internal source (6 GHz source) + 3rd port
Option 4
∗1
Noise figure 50 MHz to 3 GHz (only for B models)
Option 4B
∗1
Noise figure 50 MHz to 6 GHz (only for B models)
Option 5 Frequency translation group delay
Option 6
∗2
3rd test port (B models; for use with external
synthesizer)
Option 7 T/R step attenuator (only for A models, standard on B)
Option 8 Harmonic measurement
Option 10 AutoCal
®
control
Option 11
∗3
Test Port connector
Option 13 Intermodulation distortion
AutoCal
®
36581NNF/1 AutoCal
®
, Type N, 10 MHz to 6 GHz
36581KKF/1 AutoCal
®
, Type K, 10 MHz to 6 GHz
Noise sources
NC346A 5 dB ENR noise source (3.5 mm)
NC346B 15 dB ENR noise source (3.5 mm)
Power requirements 85-240 V, 48-63 Hz, 540 VA maximum
Dimensions 222H x 425W x 450D mm (8.75 x 16.75 x 17.75 in)
Weight 16 kg (35 lb)
Storage temperature
range
–40°C to +75°C.
Operating temperature
range
0°C to +50°C (specifications apply at 23°C ±3 °C).
Relative humidity 5% to 95% at +40°C.
EMC Directive - 89/336/EEC
EN50081-1:1992
CISPR-11:1990/EN55011:1991 Group 1 Class A
Meets the emmissions and IMMUNITY Standard
immunity requirements of: IEC 1000-4-2:1995/prEN50082-1:1995 - 4kV CD, 8kV AD
IEC 1000-4-3:1995/ENV50140:1994 - 3V/m
IEC 1000-4-4:1995/prEN50082-1:1995 -500V SL; 1000V PL
IEC 1000-4-5:1995/prEN50082-1:1995 - 2kV L-E, 1kV L-L
IEC 1000-4-6:1995/ENV50141:1994
IEC 1000-4-8:1995/prEN50082-1:1995
IEC 1000-4-11:1995/prEN50082-1:1995
Safety Meets safety requirements of Low Voltage/Safety Standard
72/23/EEC - EN61010-1:1993
GeneralEnvironmentalEMC
∗1: Does not include noise source
∗2: Port 3 is a receiving port only, unless using an external synthesizer.
∗3: Standard connector is N-female, no cost option for 3.5 mm (male),
3.5mm (female), N-male, or GPC-7
Model/Order No. Name
Calibration kits
3750LF SMA/3.5 mm RF Cal Kit ≤6 GHz
3751LF GPC-7 RF Cal Kit ≤6 GHz
3753LF 50 Ohm, Type N, RF Cal Kit ≤6 GHz
Verification kits
3663LF Type N verification kit
3666LF SMA/3.5 mm verification kit
3667LF GPC-7 verification kit
Accessories
15LL50-0.3A 3.5 mm Male-Male Cable, 30 cm
15LL50-0.6A 3.5 mm Male-Male Cable, 60 cm
15LLF50-0.3A 3.5 mm Male-Female Cable, 30 cm
15LLF50-0.6A 3.5 mm Male-Female Cable, 60 cm
15NN50-0.3B Type N Male-Male Cable, 30 cm
15NN50-0.6B Type N Male-Male Cable, 60 cm
15NNF50-0.3B Type N Male-Female Cable, 30 cm
15NNF50-0.6B Type N Male-Female Cable, 60 cm