Specifications

http://www.anritsu.com 357
NETWORK ANALYZERS
7
Ordering information
Please specify model/order number, name, and quantity when ordering.
Model/Order No. Name
Mainframe
MS4622C 10 MHz to 3 GHz direct receiver access
MS4623C 10 MHz to 6 GHz direct receiver access
Options
Option 1 Rack mount kit with slides
Option 2 Time domain
Option 3C 2nd internal source (3 GHz source) + 3rd port
Option 3D 2nd internal source (3 GHz source) + 3rd port
Option 5 Frequency translated group delay
Option 6 3rd test port (only for B and C models)
Option 7 T/R step attenuator (only for A models, standard on B)
Option 8
∗
1
Harmonic measurement
Option 10 AutoCal
®
control
Option 11
∗
2
Test Port connector
Option 13 Intermodulation distortion
∗1: Subject to frequency range limitations imposed by test set.
∗2: Standard connector is N-female, no cost option for 3.5 mm (male),
3.5mm (female), N-male, or GPC-7
Specifications
General measurement and enhancement display capabilities are the
same as those for the MS4622A/B, MS4623A/B.
Number of channels Four measurement channels
Operating port power
–5 dBm for 0.1 dB compression
(A1, A2, B1 and B2)
Maximum port power
+20 dBm
for no damage
–100 dBm@10 Hz IF bandwidth (<3 GHz),
typically >–120 dBm in narrowband sweep;
Noise floor
–100 dBm@10 Hz IF bandwidth (>3 GHz),
typically >–110 dBm in narrowband sweep
System dynamic range 97 dB
Power output range MS4622C: +10 to –85 dBm
(ports 1, 2 and 3) MS4623C: +7 to –85 dBm
Source match
–15 dB (uncorrected)
(RF1, RF2 and RF3)
Port match
–12 dB (uncorrected)
(A1, A2, B1 and B2)
Frequency range
MS4622C: 10 MHz to 3 GHz
MS4623C: 10 MHz to 6 GHz
2nd internal source Optional
Intermodulation Distortion Optional
IMD (3rd order) 70 dB with 10 Hz IF bandwidth @ 300 kHz
dynamic range tone separation and @ –20 dBm tone levels
IMD accuracy ±1 dB @ > –60 dBm levels
Power measurement ±1 dB without flat power calibration
accuracy ±0.1 dB with flat power calibration
Full reversing
Provided
transfer switch