Specifications

Menu Name Function Description GPIB Mnemonic
FLAT TEST PORT
POWER
CALIBRATION
FLAT POWER
CALIBRATION
None
CALIBRATING TEST
PORT
None
PRESS <CLEAR> TO
ABORT
Aborts the calibration. ABORTCAL
POWER
SOURCE 1 SETUP Changes the soft-key display to the Source 1
SETUP menu.
None
SOURCE 2 SETUP Changes the soft-key display to the Source 2
SETUP menu.
None
SOURCE 3 SETUP Changes the soft-key display to the Source 3
SETUP menu.
None
SOURCE 4 SETUP Changes the soft-key display to the Source 4
SETUP menu.
None
RECEIVER CAL Changes the soft-key display to the RECEIVER
SETUP menu.
None
POWER
(Power Sweep)
SELECT SOURCE
X
PSRC; PSRC?
START
XXX.XXXXXXXX dBm
Enter the sweep-start power in dBm. The start
power must be lower than the stop power.
STRTP; STRTP?
STOP
XXX.XXXXXXXX dBm
Enter the sweep-stop power in dBmz. The stop
power must be higher than the start power.
STOPP; STOPP?
SET CENTER/SPAN Changes the soft-key display to the POWER 2
menu.
None
STEP SIZE
XXX.XXXXXXXX dBm
Displays the number of frequency points and the
spacing between points for the start and stop power
levels selected above. The number of points shown
provides the finest power-sweep resolution possible,
based on the number of data points.
STEPP; STEPP?
SINGLE POWER
ON/OFF
XXX.XXXXXXXX dBm
Toggles single power on or off. SINP0; SINP2; SINPX?
SOURCE SETUP Change soft-key display to the SOURCE SETUP
menu.
None
xxx DATA POINTS Indicates the number of data points selected (For
display only)
None
POWER
(Power Sweep)
MARKER SWEEP None
RECEIVER CAL
(WARNING: SYSTEM
IS SWITCHED TO
FREQ SWP MODE
RECEIVER CAL)
None
RETURN Returns to the previous soft-key menu. None
FRONT PANEL POWER
OPERATION KEY MENUS
MS462XX OM 4-71