Specifications

Menu Name Function Description GPIB Mnemonic
RECEIVER
SETUP
RECEIVER CAL Changes the soft-key display to the RECEIVER
CALIBRATION menu.
None
RECEIVER TYPE
TEST/REFERENCE*
Selects the receiver type. TRCALTYPE;
RRCALTYPE;
RCALTYPE?
RECEIVER CAL FOR
PORT 1 ON/OFF
((NO) CAL EXISTS)
Toggles the receiver calibration for Port 1 on or off. RCALP11; RCALP10;
RCALP1X?;
RCALP1DONE?;
RRCALP11*;
RRCALP10*;
RRCALP1X?*;
RRCALP1DONE?*
RECEIVER CAL FOR
PORT 2 ON/OFF
((NO) CAL EXISTS)
Toggles the receiver calibration for Port 2 on or off. RCALP21; RCALP20;
RCALP2X?;
RCALP2DONE?;
RRCALP21*;
RRCALP20*;
RRCALP2X?*;
RRCALP2DONE?*
RECEIVER CAL FOR
PORT 3 ON/OFF
((NO) CAL EXISTS)
Toggles the receiver calibration for Port 3 on or off.
This menu item is only displayed when Port 3 is
installed.
RCALP31; RCALP30;
RCALP3X?;
RCALP3DONE?;
RRCALP31*;
RRCALP30*;
RRCALP3X?*;
RRCALP3DONE?*
EXTD. RCVR TABLE
OPERATION*
Changes the soft-key display to the EXTENDED
RCVR OPERATION menu.
None
DISPLAY RECEIVER
CAL TABLE
Changes the soft-key display to the DISPLAY
RECEIVER CAL TABLE menu. This menu item is
only displayed on instruments with Option 24.
RCALLOG
RETURN Returns to the previous soft-key menu. None
* This menu item or mnemonic is only available in the transmission/reflection application on instruments
with Option 24.
SOURCE 1 FLAT
TEST PORT
POWER
CALIBRATION
XXX POINTS
MEASURE 1 PWR
POINT EVERY XX
POINT(S)
Number of points between measurement of power
taken during flat test port power calibration, and
displays net port power if correction is on.
PTS; PTS?
POWER TARGET
XX.XX dBm
Power level at which calibration will try to level. PTP; PTP?
BEGIN CAL Changes the soft-key display to the FLAT TEST
PORT POWER CALIBRATION menu.
TP1; SFC; TPX?
RETURN Returns to the previous soft-key menu. None
POWER FRONT PANEL
KEY MENUS OPERATION
4-74 MS462XX OM