Specifications

Menu Name Function Description GPIB Mnemonic
HOLD
HOLD FUNCTION
HOLD/ Causes the hold key (button) to alternately stop and
continue the sweep from the stopped point.
HLD; HLD?
CONTINUE Causes the hold key (button) to alternately stop and
continue the sweep from the stopped point.
CTN
HOLD/RESTART Causes the hold key to alternately stop and restart
the sweep.
None
SINGLE SWEEP AND
HOLD
Causes the hold key to trigger a single sweep and
hold when finished. (Two sweeps, one from Port 1 to
2 and another from Port 2 to 1, are accomplished for
a 12-Term measurement.)
HLD; TRS
HOLD CONDITIONS None
BIAS ON/OFF Causes the hold key to trigger a single sweep and
hold when finished. (Two sweeps, one from Port 1 to
2 and another from Port 2 to 1, are accomplished for
a 12-Term measurement.)
BH0; BH1; BHX?
RF ON/OFF Selects RF to be on or off while system is in hold. RH0; RH1; RHX?
DUT/AUT
PROTECTION ON/OFF
When on, a default reset places the system in hold
with RF and bias turned off. This choice is initialized
to OFF when the software version changes or after a
Default Program key press, so that the system
comes up in the sweep mode.
AH1; AH0; AHX?
WITH DUT/AUT
PROTECTION ON, A
DEFAULT RESET
TURNS ON HOLD
WITH BIAS AND RF
TURNED OFF
None
IMPEDANCE
CONFIGURATION
IMPEDANCE
TRANSFORMATION
ON/OFF
Turns IMPEDANCE TRANSFORMATION On or Off. IMPTS0; IMPTS1;
IMPTS?
PORT X Selects port on which to set up impedance. IMPPORT; IMPPORT?
RESISTIVE TERM
XXXXXXXX
Sets the resistance value of the impedance for the
impedance transformation.
IMPRESIST;
IMPRESIST?
REACTIVE TERM
XXXXXXXX
Sets the reactive value of the impedance for the
impedance transformation.
IMPREACT;
IMPREACT?
COMPUTATION
METHOD
POWER--WAVE Selects POWER--WAVE as a computation method
for impedance.
IMPPOWER;
IMPCOMPU?
PSEUDO--WAVE Selects PSEUDO--WAVE as a computation method
for impedance.
IMPPSEUDO;
IMPCOMPU?
RETURN Returns to the previous soft-key menu. None
FRONT PANEL CONFIG
OPERATION KEY MENUS
MS462XX OM 4-81