Specifications

Menu Name Function Description GPIB Mnemonic
REAR PANEL TTL
OUTPUT MODE
SELECT PORT None
1 Selects Port 1. RVTP1; RVTPX?
2 Selects Port 2. RVTP2; RVTPX?
3 Selects Port 3. RVTP3; RVTPX?
SELECT LEVEL None
HIGH Selects a high TTL output. RVTPxHL (x=1-3);
RVTPxX? (x=1-3)
LOW Selects a low TTL output. RVTPxLL (x=1-3)
HIGH PULSE Selects a high pulse TTL output. RVTPxHP (x=1-3)
LOW PULSE Selects a low pulse TTL output. RVTPxLP LP(x=1-3)
RETURN Returns to the previous soft-key menu. None
REMOTE
INTERFACE
GPIB SETUP Changes the soft-key display to the GPIB SETUP
menu.
None
NETWORK SETUP Changes the soft-key display to the NETWORK
SETUP menu.
None
SELECT LANGUAGE None
8753D Selects the HP8753 language. LANG “8753D”
NATIVE Selects the native MS462XX language. LANG “NATIVE”
RETURN Returns to the previous soft-key menu. None
SAVE H/W
CALIBRATIONS
HW_CAL ALC Saves ALC calibration data. SAVE
HW_CAL BNF Saves BNF calibration data. SAVE
HW_CAL ALL Saves ALL calibration data. SAVE
RETURN Returns to the previous soft-key menu. None
SELECT CAL
STANDARD
OPEN Set AutoCal standard to OPEN. ACOPEN; ACSTD?
SHORT Set AutoCal standard to SHORT. ACSHORT; ACSTD?
LOAD Set AutoCal standard to LOAD. ACLOAD; ACSTD?
THRU Set AutoCal standard to THRU. ACTHRU; ACSTD?
ASSURANCE Set AutoCal standard to ASSURANCE. ACAA; ACSTD?
HELP ON/OFF Displays an informational help screen. HELP1; HELP0;
HELPX?
RETURN Changes the soft-key display to the AUTOCAL
ASSURANCE MANUAL CONTROL menu.
None
SELECT FILE TO
COPY
FILE 1 Selects FILE 1 data to be copied. None
FILE 2 Selects FILE 2 data to be copied. None
FILE 3 Selects FILE 3 data to be copied. None
FILE 4 Selects FILE 4 data to be copied. None
PREVIOUS PAGE Returns to the previous page of file names. None
NEXT PAGE Advances to the next page of file names. None
RETURN Returns to the previous soft-key menu. None
UTILITY FRONT PANEL
KEY MENUS OPERATION
4-100 MS462XX OM