Specifications

4-12 SEQ KEY MENUS This key provides entry to sequence functions.
Menu Name Function Description GPIB Mnemonic
CONDITION
STATEMENT
IF LIMIT TEST PASS Changes the soft-key display to the SELECT LIMIT
TEST PASS SEQUENCE menu.
None
IF LIMIT TEST FAIL Changes the soft-key display to the SELECT LIMIT
TEST FAIL SEQUENCE menu.
None
LOOP COUNTER
XXX
Sets the value of the loop counter and adds the
statement to the sequence editor. The range value is
0 to 65535.
None
LOOP COUNTER +1 Adds a statement LOOP COUNTER +1 to the
sequence being edited.
None
LOOP COUNTER -1 Adds the statement LOOP COUNTER -1 to the
sequence being edited.
None
IF LOOP COUNTER=0 Changes the soft-key display to the SELECT LOOP
IF ZERO SEQUENCE menu.
None
IF LOOP
COUNTER<>0
Changes the soft-key display to the SELECT LOOP
IF NOT ZERO SEQUENCE menu.
None
RETURN Returns to the CONTROL STATEMENT menu. None
CONTROL
STATEMENT
CONDITION
STATEMENT
Changes the soft-key display to the CONDITION
STATEMENT menu.
None
WAIT FOR SWEEP
COMPLETE
Adds a wait-for-sweep-complete statement to the
sequence being edited.
None
ENTER WAIT TIME
XX SEC
Enters a number of seconds to wait in the sequence
being edited.
None
PAUSE Adds a pause statement to the sequence being
edited.
None
EMBEDDED FILE
NAME ON/OFF
Toggles the embedded file name on or off and adds
a corresponding statement to the sequence editor.
None
MESSAGE Changes the soft-key display to the MESSAGE
menu.
None
SHOW MENU ON/OFF Toggles the show menu on or off. If on, each menu
name will add to the sequence editor; otherwise, the
menu name will not be in the sequence editor.
None
RETURN Returns to the SEQUENCE menu. None
FRONT PANEL SEQ
OPERATION KEY MENUS
MS462XX OM 4-121