Specifications

Menu Name Function Description GPIB Mnemonic
GOSUB
SEQUENCE
SEQUENCE 1
XXXXX
Selects sequence 1 to be called during sequence
execution; the corresponding statement will be
added to the sequence editor.
None
SEQUENCE 2
XXXXX
Selects sequence 2 to be called during sequence
execution; the corresponding statement will be
added to the sequence editor.
None
SEQUENCE 3
XXXXX
Selects sequence 3 to be called during sequence
execution; the corresponding statement will be
added to the sequence editor.
None
SEQUENCE 4
XXXXX
Selects sequence 4 to be called during sequence
execution; the corresponding statement will be
added to the sequence editor.
None
SEQUENCE 5
XXXXX
Selects sequence 5 to be called during sequence
execution; the corresponding statement will be
added to the sequence editor.
None
SEQUENCE 6
XXXXX
Selects sequence 6 to be called during sequence
execution; the corresponding statement will be
added to the sequence editor.
None
SEQUENCE 7
XXXXX
Selects sequence 7 to be called during sequence
execution; the corresponding statement will be
added to the sequence editor.
None
RETURN Returns to the previous soft-key menu. None
LOAD
SEQUENCE
TO SEQUENCE
NUMBER X
Sets a sequence # to load. None
FROM HARD DISK Changes the soft-key display to the SELECT FILE
TO READ menu to select a hard disk file to load.
SEQLOAH1 thru
SEQLOAH7
FROM FLOPPY DISK Changes the soft-key display to the SELECT FILE
TO READ menu to select a floppy disk file to load.
SEQLOA1 thru
SEQLOA7
RETURN Returns to the previous soft-key menu. None
MESSAGE
MESSAGE TO
OPERATOR
Changes the soft-key display to the ENTER A
SEQUENCE OPERATOR MESSAGE menu.
None
SEQUENCE
COMMENT
Changes the soft-key display to the ENTER A
SEQUENCE COMMENT menu.
None
RETURN Returns to the previous soft-key menu. None
PARALLEL OUT
SETUP
SET PARALLEL OUT
PORT (0-255)
X
Sets the value of the parallel out port (pins 7 through
13 and 15, of rear panel Ext I/O connector).
POP; POP?
SET PARALLEL OUT
BIT (0-7)
X
Sets the selected bit of the parallel out port to a 1. POPBS0 thru POPBS7
CLEAR PARALLEL
OUT BIT (0-7)
X
Sets the selected bit of the parallel out port to a 0. POPBC0 thru POPBC7
RETURN Returns to the previous soft-key menu. None
SEQ FRONT PANEL
KEY MENUS OPERATION
4-124 MS462XX OM