Specifications

Menu Name Function Description GPIB Mnemonic
SEQUENCE
NAME
(Name) Display the name. None
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
0123456789()-
!#$%&’@^_’{}-
*?:\.SP
Name your sequence using the rotary knob to select
letters, numbers, or both. A letter or number turns
red to indicate that the letter/number has been
chosen for selection. Pressing the Enter key selects
the letter or number. You are allowed up to 15 char
None
BKSP CLR DONE Selecting BKSP deletes the last letter in the name
displayed above.
Selecting CLR deletes the entire name.
Selecting DONE signals that you have finished
writing the name.
None
TURN KNOB TO
INDICATE
CHARACTER OR
FUNCTION
Use the rotary knob to indicate the letter or number
you wish to select.
You can use the external keyboard up-arrow and
down-arrow keys to move between rows.
None
PRESS <ENTER> TO
SELECT
Pressing the Enter key implements your menu
selection. The menu remains on the screen until
another menu is selected for display or until the
CLEAR/RET LOC key is pressed.
None
NUMBERS MAY BE
SELECTED USING
KEYPAD
You may also select numbers and decimals using
the keypad.
None
SEQUENCE
UTILITY
LOAD SEQUENCE Changes the soft-key display to the LOAD
SEQUENCE menu.
None
SAVE MESSAGE TO
SERVER LOG
ON/OFF
When on, saves sequence message to the Service
Log.
SEQDGMSG0;
SEQDGMSG1;
SEQDGMSG?
SAVE SEQUENCE None
DELETE SEQUENCE Changes the soft-key display to the DELETE
SEQUENCE menu.
None
RENAME SEQUENCE Changes the soft-key display to the RENAME
SEQUENCE menu.
None
RETURN Returns to the previous soft-key menu. None
TTL I/O
REAR PANEL SETUP Changes the soft-key display to the REAR PANEL
menu.
None
PARALLEL OUT
SETUP
Changes the soft-key display to the PARALLEL OUT
SETUP menu.
None
PARALLEL IN BIT (0-4) Sets up which parallel-in bit is to be used and adds
the corresponding statement to the sequence editor.
None
IF PARALLEL IN BIT
HIGH
Changes the soft-key display to the SELECT BIT
HIGH SEQUENCE menu. (This entry only appears
in sequence editing mode.)
None
IF PARALLEL IN BIT
LOW
Changes the soft-key display to the SELECT BIT
LOW SEQUENCE menu. (This entry only appears in
sequence editing mode.)
None
RETURN Returns to the previous soft-key menu. (This entry
only appears in sequence editing mode.)
None
SEQ FRONT PANEL
KEY MENUS OPERATION
4-128 MS462XX OM