Specifications

Menu Name Function Description GPIB Mnemonic
3 PORT
CALIBRATION
CONNECT
CALIBRATION DEVICE
None
SLIDE LOAD TO
POSITION x
Slide the load to the indicated position, then press the
MEASURE DEVICES soft-key.
None
MEASURE DEVICE(S) Changes the soft-key display to the next 3 PORT
CALIBRATION menu.
TCD
3 PORT
CALIBRATION
MEASURING... None
RESTART
MEASUREMENT
Changes the soft-key display to the beginning 3
PORT CALIBRATION menu.
None
3 PORT
CALIBRATION
REMEASURE Changes the soft-key display to the previous 3 PORT
CALIBRATION menu.
None
NEXT CAL STEP Changes the soft-key display to next 3 PORT
CALIBRATION menu.
NCS
3 PORT
CALIBRATION
CONNECT ISOLATION
DEVICES TO ALL
PORTS
Connect appropriate isolation devices to all test ports. None
MEASURE DEVICE(S) Changes the soft-key display to the next 3 PORT
CALIBRATION menu.
TCD
4 PORT
BEGIN 4 PORT
CALIBRATION
(40 TERMS)
KEEP EXISTING CAL
DATA
Changes the soft-key display to the FREQUENCY
menu, in the Freq key group.
KEC
REPEAT PREVIOUS
CAL
Changes the soft-key display to the beginning
4 PORT CALIBRATION menu.
RPC
CAL METHOD
XXXX
Displays the current calibration method. CM4PX?
LINE TYPE
XXXX
Displays the current line type. LTX?
CHANGE CAL METHOD Changes the soft-key display to the SELECT 4 PORT
CAL METHOD menu.
None
USE EXISTING 3 PORT
CAL? YES/NO
Selects if the existing 3 Port Cal is used in the 4 Port
Cal.
US3P; NUS39;
US3P?
NEXT CAL STEP Changes the soft-key display to the 4 PORT
CONFIRM CALIBRATION PARAMETERS menu.
None
4 PORT
CALIBRATION
(TRX)
CONNECT A THROUGH
LINE BETWEEN PORTS
1 AND 4
None
MEASURE DEVICE(S) Changes the soft-key display to the next 4 PORT
CALIBRATION menu.
TCD
CAL FRONT PANEL
KEY MENUS OPERATION
4-130 MS462XX OM