Specifications

Menu Name Function Description GPIB Mnemonic
4 PORT
SELECT TYPE OF
LOAD
BROADBAND
FIXED LOAD
Selects a broadband load for calibration and changes
soft-key display to the BROADBAND LOAD
PARAMETERS menu.
BBL; BBX?
SLIDING LOAD
(MAY ALSO
REQUIRE A
BROADBAND
FIXED LOAD)
Selects sliding load for calibration. If low-end
frequency is below 2 GHz (4 GHz for V Connector), a
fixed broadband load is also required.
SLD; BBX?
4 PORT
SELECT
CONNECTOR TYPE
SMA (M) Sets port 4 to be male SMA connector. CMS; P1C?; P2C?
SMA (F) Sets port 4 to be female SMA connector. CFS; P1C?; P2C?
K-CONN (M) Sets port 4 to be male K connector. CMK; P1C?; P2C?
K-CONN (F) Sets port 4 to be female K connector. CFK; P1C?; P2C?
TYPE N (M) Sets port 4to be male N connector. CMN; P1C?; P2C?
TYPE N (F) Sets port 4 to be female N connector. CFN; P1C?; P2C?
USER DEFINED Changes the soft-key display to the 4 PORT OPEN
DEVICE menu.
CND; P1C?; P2C?
MORE Changes the soft-key display to the next 4 PORT
SELECT CONNECTOR TYPE menu.
None
4 PORT
SELECT
CONNECTOR TYPE
GPC-3.5 (M) Sets port 4 to be male GPC 3.5 connector. CM3; P1C?; P2C?
GPC-3.5 (F) Sets port 4 to be female GPC 3.5 connector. CF3; P1C?; P2C?
GPC-7 Sets port 4 to be GPC-7 connector. CNG; P1C?; P2C?
V-CONN (M) Sets port 4 to be male V connector. CMV; P1C?; P2C?
V-CONN (F) Sets port 4 to be female V connector. CFV; P1C?; P2C?
USER DEFINED Changes the soft-key display to the 4 PORT OPEN
DEVICE menu.
CND; P1C?; P2C?
MORE Changes the soft-key display to the next 4 PORT
SELECT CONNECTOR TYPE menu.
None
4 PORT
SELECT
CONNECTOR TYPE
TNC (M) Sets port 4 to be male TNC connector. CMC; P1C?; P2C?
TNC (F) Sets port 4 to be female TNC connector. CFC; P1C?; P2C?
2.4 mm (M) Sets port 4 to be male 2.4 mm connector. CM2; P1C?; P2C?
2.4 mm (F) Sets port 4 to be female 2.4 mm connector. CF2; P1C?; P2C?
USER DEFINED Changes the soft-key display to the 4 PORT OPEN
DEVICE menu.
CND; P1C?; P2C?
MORE Changes the soft-key display to the next 4 PORT
SELECT CONNECTOR TYPE menu.
None
4 PORT
SELECT
CONNECTOR TYPE
TYPE N (M) 75 Ohm Sets port 4 to be male Type N 75 Ohm connector. CMN75; P1C?;
P2C?
TYPE N (F) 75 Ohm Sets port 4 to be female Type N 75 Ohm connector. CFN75; P1C?;
P2C?
7/16 (M) Sets port 4 to be male 7/16 connector. CM716
7/16 (F) Sets port 4 to be female 7/16 connector. CF716
SPECIAL (M) Sets port 4 to be male Special connector. CMSP; P1C?; P2C?
SPECIAL (F) Sets port 4 to be female Special connector. CFSP; P1C?; P2C?
USER DEFINED Changes the soft-key display to the 4 PORT OPEN
DEVICE menu.
CND; P1C?; P2C?
MORE Changes the soft-key display to the next 4 PORT
SELECT CONNECTOR TYPE menu.
None
FRONT PANEL CAL
OPERATION KEY MENUS
MS462XX OM 4-135